Cintex Metal detector head unit 26 x 7
Model MIH14x9 SS
aperture is 26 inch wide x 7 inch high
S/N 7222 Auto 2
Freq set high
11/95
(This is the unit with the questionable head seal)

Cintex Autosearch II metal detector (head only) painted head
aperture measures 52" wide X 6" high
Serial number 06131
(last certified 7/02)

CINTEX UNIT
model CS2084
S/N 52158
5/29/01


LOMA UNIT
model IQ
S/N 1008B-16703
has reject light attached to box

Loma IQ 17.5 in x 3.75 metal detector head only
17.5 in x 3.75 in aperture

Head and control ID's:1008B-14610
July 1999
aperture 450 x 100 mm
Freq: 204
Coil gap: 80
filter values: 420

Goring Kerr Thermoelectron metal detector head
15-7/8" wide x 4" high aperture opening
S/N 04424905

Unit was working when pulled from service. Went to larger unit.

Lock Metalchek 9 metal detector s/n 68431
Type 9/SP/285/GM18/115
s/n 68431 (10/88)
Power 20
Modification: 285 Khz
00BV4MV (12/14/88)

14" x 5" aperture opening
4" x 60" x 42"H belt
air reject push arm
electric eye
1/4 hp 90 volt DC

SS and mild steel frame stand

Last used in macaroni plant

Lock metalchek 9 metal detector s/n 86598
Type 9/SP/286HP/97718/115
S/N 86598 (12/97)
Power 25
Modifications: 25mvpp error voltage

14" x 6" aperture opening
12"W x 48"L x 32"H belt
1//3 hp 115/208 volt

SS frame/stand construction

Last used in macaroni plant

Lock Metalchek Super 9 metal detector s/n 86599
Type 9/SE/288B9/9N18/115
s/n 86599 (09/93)
Power 25

14" x 6" aperture opening
4"W x 60"L x 32"H belt

Air reject push bar
electric eye
1/4 hp 90 volt DC

SS frame/stand construction

Last used in macaroni plant

Lock Metalchek Super 9 metal detector s/n 87392
Type 9/SP/SUPER/284BG/M18/115
s/n 87392 (03/94)
power 24

18" x 6" aperture opening
11"W x 48"L x 30"H belt

1/3 hp 115/208 volt

SS frame/stand construction

last used in macaroni plant

Lock Metalchek 9 metal detector
s/n 67332 (05/88)
14 x 5 aperture
12"W x 60"L belt x 44" belt height
1/4 hp 208-230/460 volt

OAD'S: 28"W x 64"L x 58"H

MISSING MAIN CONTROL PANEL
WE HAVE A SPARE PANEL S/N 10917 TO INSERT INTO UNIT

Fortress Phantom 3" flow thru metal detectors
3 inch flow thru with reject valve

5 UNITS AVAILABLE

S/N of one is H-29586-8075

Model Phantom WD

Reject: O/P 5A/250 vac

Isolated: O/P 170 mA/250 vac / DC

Fault: O/P
" " "
Mfg: 2005

s/n: F-8668-5534

HEAD: 100-120 vac / 200/240 vac

Mounted on SS stands


Last used in meat industry
Remain in excellent working condition

Videos of units under power upon request.

Loma IQ2 metal detector

7-1/2" x 21" wide aperture (550 mm x 200 mm)

Mfg 01/2003

Head s/n: KIMH11580

Freq: 204Khz

coil gap: 6.3

RX distance: 11"

filter value: 750K

120 volt

There is a conveyor that goes with this head
but the unit is missing the belt.

This will be included in the price.

Unit was last used in the food industry.

Ramsay Icore Metal Scout IIe metal detector
S/N: 98-E01286
aperture is 13-3/4"W x 3-7/8"H (2-1/2" clear over belt)
Air reject
Leeson Washguard DC motor controller for belt
Unit has been tested with test wands
Unit has been run for belt drive
Unit will require a new intralox belt
Belt base is 75" long and will need a 12 inch wide belt
Belt height is 28 inches (adjustable legs)
SS frame and head

OAD's: 75L x 46W x 34H

Safeline 14 x 5 Metal Detector With Incline Conveyor Stainless Steel

14" x 5" aperture; 3-3/4" clear over belt ( could be more if HUMW piece removed )

Model PPA/14X05/S/100-300/HD/US

S/N 59025

MODULE# 101953

Unit infeeds at 35" & discharges at 47"

Intralox belt with rubber gripper sections

Last used in the food industry